Bronze

From Encyclopedia Jr, free information reference for Kids

Assorted ancient bronze castings found as part of a cache, probably intended for recycling.

Bronze refers to a broad range of copper alloys, usually with tin as the main additive, but sometimes with other elements such as phosphorus, manganese, aluminium, or silicon. (See table below.) It is strong and tough and has myriad uses in industry. It was particularly significant in antiquity, giving its name to the Bronze Age.

[edit] History

Introduction of bronze was significant to any civilization that encountered it. Tools, weapons, armor, and various building materials like decorative tiles made of bronze were harder and more durable than their stone and copper ("Chalcolithic") predecessors. In early use, the natural impurity arsenic sometimes created a superior natural alloy; this is termed arsenical bronze.

The earliest tin-alloy bronzes date to the late 4th millennium BC in Susa (Iran) and some ancient sites in Luristan (Iran) and Mesopotamia (Iraq).

While copper and tin can naturally co-occur, the two ores are rarely found together (although one ancient site in Thailand and one in Iran provide counterexamples). Serious bronze work has therefore always involved trade. In fact, archaeologists suspect that a serious disruption of the tin trade precipitated the transition to the Iron Age. In Europe, the major source for tin was Great Britain. Phoenician traders visited Great Britain to trade goods from the Mediterranean for tin. It is believed that the etymology of Britain is the Phoenician name "Barr Tan" meaning tin wilderness.

Bronze was stronger than the era's iron; quality steels were not available until thousands of years later. But the Bronze Age gave way to the Iron Age, perhaps because the shipping of tin around the Mediterranean (or from Great Britain) became more limited during the major population migrations around 1200 – 1100 BC, which dramatically limited supplies and raised prices [1]. Bronze was still used during the Iron Age, but for many purposes the weaker iron was found to be sufficiently strong. As ironworking improved, iron became both cheaper and stronger, eclipsing bronze in Europe by the early to mid-Middle Ages.

[edit] Properties

With the exception of steel, bronze is superior to iron in nearly every application. Although bronze develops a patina, it does not oxidize beyond the surface. It is considerably less brittle than iron and has a lower casting temperature.

Copper-based alloys have lower melting points than steel and are more readily produced from their constituent metals. They are generally about 10 percent heavier than steel, although alloys using aluminium or silicon may be slightly less dense. Bronzes are softer and weaker than steel, Bronze springs are less stiff (and so store less energy) for the same bulk. It resists corrosion (especially seawater corrosion) and metal fatigue better than steel and also conducts heat and electricity better than most steels. The cost of copper-base alloys is generally higher than that of steels but lower than that of nickel-base alloys.

Copper and its alloys have a huge variety of uses that reflect their versatile physical, mechanical, and chemical properties. Some common examples are the high electrical conductivity of pure copper, the excellent deep-drawing qualities of cartridge case brass, the low-friction properties of bearing bronze, the resonant qualities of bell bronze, and the resistance to corrosion by sea water of several bronze alloys.

In the twentieth century, silicon was introduced as the primary alloying element, creating an alloy with wide application in industry and the major form used in contemporary statuary. Aluminium is also used for the structural metal Aluminium bronze.

Bronze is the most popular metal for top-quality bells and cymbals, and more recently, saxophones. It is also widely used for cast metal sculpture (see bronze sculpture). Common bronze alloys often have the unusual and very desirable property of expanding slightly just before they set, thus filling in the finest details of a mould.Bronze parts are typically used for bearings , clips, electrical connectors and springs.

Bronze also has very little metal-on-metal friction, which made it invaluable for the building of cannons where iron cannonballs would otherwise stick in the barrel. It is still widely used today for springs, bearings, bushings, automobile transmission pilot bearings, and similar fittings, and is particularly common in the bearings of small electric motors. Phosphor bronze is particularly suited to precision-grade bearings and springs.

Bronze is typically 60% copper and 40% tin. Alpha bronze consists of the alpha solid solution of tin in copper. Alpha bronze alloys of 4-5% tin are used to make coins, springs, turbines and blades.

Commercial bronze (otherwise known as brass) is 90% copper and 10% zinc, and contains no tin. It is stronger than copper and it has equivalent ductility. It is used for screws and wires.

Another useful property of bronze is that it is non-sparking. That is, when struck against a hard surface, unlike steel, it will not generate sparks. This is used to advantage to make hammers, mallets, wrenches and other durable tools to be used in explosive atmospheres or in the presence of flammable vapours.

[edit] Classification of copper and its alloys

[edit] See also

• Brass, a subset of the copper alloys in which zinc is the principal additive
• Gunmetal
• Cupronickel, an alloy used on ships
• lost-wax casting
• Aluminum bronze
• Phosphor bronze
• Tiles
• Bronzing, a process by which an object is coated in bronze
• Luristan bronze

[edit] External links

• 19th century bronze sculpture sand casting
• Bronze Casting process explained - good pictures
• National Pollutant Inventory - Copper and compounds fact sheet

[edit] References

1. ^ Machinery's Handbook, Industrial Press Inc, New York, ISBN 0-8311-2492-X, Edition 24, page 501